Thrust Bearings

Contact Now

Thrust ball bearings, composed of bearing balls supported in a ring, can be used in low thrust applications where there is little axial load.
Cylindrical thrust roller bearings consist of small cylindrical rollers arranged flat with their axes pointing to the axis of the bearing. They give very good carrying capacity and are cheap, but tend to wear due to the differences in radial speed and friction which is higher than with ball bearings.
Tapered roller thrust bearings consist of small tapered rollers arranged so that their axes all converge at a point on the axis of the bearing. The length of the roller and the diameter of the wide and the narrow ends and the angle of rollers need to be carefully calculated to provide the correct taper so that each end of the roller rolls smoothly on the bearing face without skidding. These are the type most commonly used in automotive applications (to support the wheels of a motor car for example), where they are used in pairs to accommodate axial thrust in either direction, as well as radial loads. They can support greater thrust loads than the ball type due to the larger contact area, but are more expensive to manufacture.

SKF 353118 Tapered Roller Thrust Bearings

-20 °C 100 °C
16 mm F209-

SKF 353005 Thrust Bearings

2 mm -40 °C
100 mm 7.57 Hz

SKF 353162 Screw-down Bearings

M6x1 200 °C
20 mm 16 mm

SKF 350980 C Tapered Roller Thrust Bearings

14mm 25.7 kN
UC207G2 34 mm

SKF BFSB 353320/HA4 Custom Bearing Assemblies

Yes Baldor-Dodge
Steel 207 Series

SKF BFSB 353312/HA1 Screw-down Bearings

B04144 25 mm
0.8 kg 9.23 Hz

SKF BFSB 353210 Tapered Roller Thrust Bearings

66 mm 3.91 Hz
NTN 2 mm

SKF 351573 Thrust Bearings

19 mm 0.8 kg
38.7 mm 25.4 mm

SKF BFSB 353247 Needle Roller and Cage Thrust Assemblies

120 °C 5,600 rpm
CN 0.0
1/10